VM-200 Stereo hybrid power amplifier

TUBE + MOSFET

Lector proudly introduces the all new VM200 hybrid power amplifier featuring innovative direct coupled circuit from tube to mosfet. No any coupled capacitors on signal path! This new concept offers a transparent and rich dinamics sounds performances. A lot of new innovative technologies and solution on this power amplifier rathed as 100 w per channel.

Features

• Only two stages from input to output (first stage by triode and second stage by pentode)
• Dc coupled design from tube to mosfet without any capacitors!
• Triode / pentode tube driving the mosfet in pure class A
• Low feedback design set to only at 10% dB
• The power supply employ four stages and two toroidal transformers,
• The power supply design : shunt regulator for tube , hi-energy reservor capacitors for output mosfet, the tube-filaments are supply on d.c. for lowest noise floor !
• The electronics and mechanical parts are selected as all premium grade components : polypropylene capacitors, toroidal hi-energy power transformer (2) , metal foil and tantalium resistors.
• 1.5 mm tickness steel chassis box,
• 10 mm tickness plexiglass front panel.

Performance

• Unit description：Real Hybrid stereo power amplifier
• Tube active circuit：PCL-86 / 14 GW 8 (2 tubes)
• Frequency response：20 - 500.000 Hz +/- 1 dB
• THD distorsion：<0.1 %
• S/N Ratio：100 dB ( A-weighted)
• Input sensibility and gain：1.5 V / 100 kohm input
• Output power：20 W rms class A / 115 Watt RMS on 8 ohm /180 Watt RMS on 4 ohm
• Optional：cherry wood veenered side panels/ solid black plexi
• Power supply main：100V / 120V / 230V ac 500 V / A (factory set)
• Dimension, weight (net)：400 (L) x 110 (H) x 400 (D) Kg.17 net-19 Kg gross
• Dimension, weight with lateral panels：440 (L) x 110 (H) 400 (D) Kg. 20 net - 22 Kg gross