A hi-fi system basically reproduces nothing other than modulated household electricity. Ideally, this should be made available to the components without any further inhibition. However, dynamic music with complex bass runs places an impulsive load on the electronics of the integrated or power amplifiers belonging to a high-end hi-fi system. Here the power cable plays a significant role. The challenge for power cables on audio devices with a high sound quality are extreme current peaks that can generate strong magnetic fields and interference radiation, leading to power losses at line and transition resistances. These rapidly changing increases and decreases in current must be passed on to the electronic components with as little delay as possible, since a blocked current flow would have a negative effect on the sound. Physics tells us that an electrical conductor has capacitive and inductive characteristics in addition to its resistance, and these disturb the flow of energy between the power socket and the hi-fi device. The goal is always a power supply without any time-lag and with minimum loss, enabling large amounts of energy to be transported in a very short time. Accordingly, the power cord from the wall socket to the hi-fi equipment plays a very important role in the transmission chain.
- AIR Helix Point-to-Point
- Dielectric: air
- 4-fold multicore
- 2 x 1.5 mm² (4 x 0.75 mm²)
- Pure copper
- Shielding: thick copper braiding, tin-plated (oxidation protection)
- Cable diameter: 13 mm
- Connectors: Referenz BASIC
- BASIC: NEMA -> C15 & NEMA -> C19
- Individual inspection: Function | Ground wire | Insulation | High voltage
- Certificate included | Protection Class 1
- Load C15: 2300 W (230 V AC / 10 A)
- Load C19: 3680 W (230 V AC / 16 A)
- Rated voltage: 250 V AC | 50/60 Hz
- Rated current: 10 A / 16 A
- Length: 2 m | Custom lengths on request
+852 9149 2164
1504191160
richcolninfo 
richcolninfo