B-130 XS Integrated Amplifier


 

 

A unique performer, the B-130XS takes the best from the B-150XS, and offers this at a reduced price.

For those dreaming of the B-150XS, the B-130XS might be to get as close to the dream as possible. The B-130XS takes the performance of the B-150XS and delivers 95% of this at a more affordable package. Still the B-130+ is a strong performer. Using the same microprocessor-controlled relay attenuator, and a similar power amplifier as the B-150XS, here with 2 x 80 W/8 ohm and 2 x 160 W/4 ohm, the B-130XS has the legendary power of Densen, with firm grip on speakers and musicality. The features known from Densen, like possibility of RIAA, Bi/Tri/Quad amping, FabelDAC internal DAC and a clever processor loop rounds this strong performer from Densen off, and let you focus on music and pleasure for years to come.

Highlights
The integrated Densens are built to perform and are crafted with the same care and technology as their separate siblings. Each unit is the result of perfect craftmanship.

  • 200 step relay controlled volume control (0,5 dB steps)
  • Custom made 500 VA torrodial transformer insures ultra low-noise and a firm grip on speakers
  • 60.000 µF capacitor bank made with custom Densen high speed capacitors
  • Expansion port for DP-07 phono board – turn your line-1 input into a phono-input.
  • Expansion port for future upgrades (DAC, Surround, Streaming)
  • Upgradeable with external power supply (1NRG)
  • Designed in Denmark – Made in Denmark

Description
Densen now introduces the B-130XS. The B-130XS in reality is a downscaled B-150PLUS using many of the same advanced solutions, that has made the B-150PLUS amplifier of the year, and editors choice in many countries.

Compared to the “old” B-130 and B-130PLUS, the B-130XS is significantly upgraded in the audio circuit, resulting in an even more impressive performance, than before. Further more it has a new interface, that will allow it to control an internal Densen DAC with either Toslink or COAX digital inputs, where the pushbottons on the front and the Gizmo will control the input selection, and the display will correctly indicate which input on the DAC that is choosen.

The B-130XS contains Densens strong signature of engaging and neutral sound, with both details and dynamics. The topology solutions are highly advanced, and not normal present in amplifiers in this price range. Like all other Densen amplifiers the B-130XS is a non-feedback design, using extremely fast and reliable transistors, and other high quality parts to make an amplifier which no matter the loading, will perform at its best.

The B-130XS contains several unique features, like processor loop, to allow easy connection to external surround processors and the possibility of adding Densens SB-1 or SB-2 analogue surround boards for easy connection to Blu Ray players with analogue 5+1 or 7+1 output.

Also there is an internal socket for Densens DP-7 MM stage.

Naturally Densens B-130XS contains several connections, including 2 preamp outputs, so it is possible to upgrade to either bi- or tri-amping. Internally in the B-130XS is a socket, which allows to further update with the Densen SAXO electronic crossover to an active system.

The B-130XS contains separate power supplies for output transistors, drivers, pre amp and microprocessor, a total of 7 rectifiers and 90.000 µF capacity coupled with a massive toroid transformer, which is encapsulated to minimize influence from vibrations. By use of surface mounted components, it has been possible to keep the total size of the PCB small, to minimize EFI distortion on the circuit. As such each amplifier channel is not larger than a credit card, which has allowed a much faster than normal circuit, due to the minimum EFI influence.

Not only the power supply and pcb layout is done without any compromise, also the used components are of an extremely high quality, as such there is used Vishay metal film resistors, custom made capacitors, high quality Vima film capacitors, Sanken transistors, sealed relays and gold plated inputs. However the most important is the sound, and the Densen team has done as much as humanly possible to make the sound performance of the B-130XS second to none. The B-130XS delievers 80 watt in 8 ohm, and 160 watts in 4 ohm. Has connections for Densens DenLink multiroom system, and as all other Densen products, comes with a life long warrenty for the first owner.

 

Specs & Features

  • Power output in 8 ohms: 2 x 80 W
  • Power output in 4 ohms: 2 x 160 W
  • 4 – line inputs + 1 tape in/output
  • 2 pre-amp outputs for bi-amp wiring
  • Processor-loop for use as power-amp in a home-theater setup
  • ERP-input for use with external Densen power supplies (1-NRG)
  • Expansion port for use with expansion modules (Surround board, DAC boards, streaming boards)
  • Internal DP-connector – connect a DP module and turn line 1 into a phono input (DP-07 MM module)
  • Gizmo system remote compatible
  • SAXO compatible
  • Power supply size: 500 VA
  • Storage capacity: 60.000 µF
  • THD + Noise @ rated output: less than 0.05 %
  • Frequency response: 2 - 500.000 Hz
  • Weight: 13 kg
  • Dimensions (W x D x H): 440 x 310 x 64 mm
  • Designed and Made in Denmark