TD 202


New TD 202 completes the new series of manual plug and play turntables. Compared with its “smaller” brother TD 201 it comes with a more massive plinth and a AT 95E cartridge.

Special Features
The integrated phono stage includes an additional analogue/digital converter with USB out. So the record played will be automatically digitized and can easily be recorded on a computer using several kinds of recording software that can be downloaded from the web.



 Turntable section 
 Drive System  Belt Drive
 Motor  DC Motor
 Speed  33 1/3 RPM, 45 RPM
 Rotation Speed Variation  +/–2%
 Wow and Flutter  0.2%
 Signal-to-Noise Ratio

 67dB or higher (A-weighted, 20kHz LPF)

 60dB or higher (unweighted, 20kHz LPF)

 Platter  Aluminum Die-cast
 Diameter of Platter  12", 300mm
 Tonearm section
 Armtube  Alumi tube
 Type  Static Balance, Straight
 Effective Arm Length  8.8", 223.6mm
 Stylus Pressure Range  0 to 4g
 Supported Cartridge Weight  3.5 to 6.0g
 Overhang  18.6mm
 Anti-skating Adjustment  Supported
 Cartridge section 
 Type  MM type (Audio-Technica AT-95E)
 Stylus Construction  Bonded Diamond
 Frequency Response  20Hz to 20kHz
 Channel Separation  >18dB
 Channel Balance  2.5dB
 Vertical Tracking Angle  20 degrees
 Supported Load Impedance  47k ohms
 Output Voltage  2.5mV (1kHz, 3.54cm/sec.)
 Stylus Pressure  2.0g +/–0.5g
 Cartridge Weight  5.7g +/–0.5g
 Head-shell Weight  11g (including Screws, Nuts and Wires)
 Analog Output
 Connector  RCA Pin jack (Gold-plated)
 Power  AC 100 to 240V, 50/60Hz
 Power Consumption  1.5W (less than 0.5W at Standby)
 Overall Dimensions (W x H x D)  420 x 355 x 121 mm
 Weight  Approx. 3.9 kg