3510 Integrated Amplifier




  • 110W RMS per channel into 8 Ohms
  • Six line inputs
  • Option to fit a MC or MM phono module OR plug in DAC option
  • Bi-wiring compatible
  • Separate pre-amp output
  • High quality capacitors used in the signal path
  • Uniquely tuned short signal and power supply path PCB
  • Cascode circuitry utilised for improved power supply immunity
  • Fast bipolar transistor output stage for dynamic and vivid performance
  • All aluminium casework and extruded front panel to control resonance and stray electro-magnetic fields
  • Remote control
  • Available in black or titanium


Power Output (Stereo) 110W per channel at 1kHz into 8 Ohms
Pre-Amplifier Output 1.9V for rated input (gain +18dB full volume)
Maximum Output 7.7V RMS @ 1kHz
Frequency Response 20Hz - 20kHz ± 0.5dB
Total Harmonic Distortion <0.03% at rated output, ref. 1kHz
Signal to Noise Ratio >100dB, ref. rated output
Channel Separation >60dB, 20Hz - 20kHz
Output Impedance <12 Ohms at 1kHz
Maximum Level into 33 Ohms at 1kHz & 0.05% THD 4.8V RMS, (700mW)
Total Harmonic Distortion at 2V Output 1kHz <0.02%, (120mW)
Maximum Level into 330 Ohms at 1kHz & 0.02% THD 7V RMS (150mW)
Total Harmonic Distortion at 2V Output 1kHz <0.015%, (12mW)
Inputs (Line)
Input Impedance 17K Ohms minimum (line input)
Input Sensitivity 250mV
Mains Supply 110/120V or 220/240V, 50/60Hz (factory set)
Fuse T8AL for 110/120V units / T4AL for 220/240V units
Power Consumption <400W, 8 Ohms load, both channels driven
imensions (HxWxD) 115mm x 440mm x 300mm
Net Weight 12kg